13. COMET 500 errors
Message
Display
type
Error
(Error)
Take a photo of the error message and contact your Leister Service Center.
1
14. Frequently asked questions, causes, and measures COMET 700/500
Deficient welding result quality:
• Check drive speed, hot wedge temperature and potentially joining force
• Clean hot wedge (15), drive/pressure rollers (9/11) and contacting system (13/14) with brass brush (see
COMET 700/500
• Hot wedge (15) incorrectly positioned
(see
Check position of the hot wedge [5.1])
• wrong contacting system used
(see Contacting system
38
Error code
Group 0001'XXXX
e.g. 00010001
Group 0004'XXXX
e.g. 00040002
Group 0008'XXXX
e.g. 00080001
Group 0200'XXXX
e.g. 02000001
Group 0400'XXXX
e.g. 04000001
maintenance) [16].
setup [5.2])
Error description
Temperature problems
solution: Allow the device to cool down.
Hardware Issues
1
Temperature Sensor Issues
Communication Module Issues
Drive Issues
1
1
1