Advertisement
CONNECTING THE UCM P800:
8x FXO Port
USB
Port
SD Card Slot
2x FXS Port
1. Connect one end of an RJ-45 Ethernet cable into the WAN port of the UCM
P800.
2. Connect the other end of the Ethernet cable into the uplink port of an Ether-
net switch/hub.
3. Connect the 12V DC power adapter into the 12V DC power jack on the back of
the UCM P800. Insert the main plug of the power adapter into a surge-protected
power outlet.
4. Wait for the UCM P800 to boot up. The front LCD display will show the UCM's
hardware information when the boot process is completed.
5. Once the UCM P800 is successfully connected to a network, the Network LED
indicator will be lit green, and an IP address will be shown on the LCD display.
6. (Optional) Connect PSTN lines from the wall jack to the FXO ports, connect
analog devices (phone and fax) to the FXS ports.
USING THE UCM P800 KEYPAD MENU:
1. Press "Down" or "OK" key to start browsing menu options.
2. Press "Down" to browse different menu options. Press "OK" to select an entry.
3. In the menu option, select "Back" to go back to previous menu.
4. The LCD will return to default display after being idle in menu for more than 20
seconds.
3
Network
USB Phone1
ACT
SD
Phone2
LED Indicators
LCD
DC IN
RESET
LAN
DC 12V
Reset
LAN Port
WAN Port
CONFIGURING THE UCM P800 VIA WEB GUI:
Navigation
1. Connect the computer to the same network as the UCM P800.
Keys
2. Ensure the UCM P800 is properly powered on and displays the IP address on
the LCD screen.
3. Open a web browser on the computer and enter the displayed IP address into
the search bar in the following format: http(s)://ipaddress:portnumber.
The default protocol is HTTPS and the default port number is 8089.
WAN
4. The web portal should be shown (see figure below). Enter the default admin-
istrator credentials:
•
Ground
•
5. For more detailed information on how to configure SIP extensions, PSTN con-
nections, SIP trunks, and other system settings via the web UI, please download
the UCM P800 user manual here: http://www.grandstream.com/support/
This product is covered by one or more of the U.S. patents (and any
foreign patent counterparts thereto) identified at www.cmspatents.com.
Username: admin
Password: Unique default password printed on the sticker.
4
Advertisement
