Electromagnetic Compatibility - National Instruments SCC-AI Series User Manual

Safety
For UL and other safety certifications, refer to the product label, or visit
Note
ni.com/hardref.nsf
appropriate link in the Certification column.

Electromagnetic Compatibility

Note For full EMC compliance, operate this device with shielded cabling. In addition,
all covers and filler panels must be installed.
CE Compliance
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/hardref.nsf
appropriate link in the Certification column.
© National Instruments Corporation
The SCC-AIXX meets the requirements of the following standards
for safety and electrical equipment for measurement, control, and
laboratory use:
• IEC 61010-1, EN 61010-1
• UL 3111-1, UL 61010B-1
• CAN/CSA C22.2 No. 1010.1
, search by model number or product line, and click the
Emissions ............................................... EN 55011 Class A at 10 m
Immunity................................................ EN 61326:1997 + A2:2001,
CE, C-Tick, and FCC Part 15 (Class A) Compliant
The SCC-AIXX meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low Voltage Directive (safety).............. 73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .................................... 89/336/EEC
, search by model number or product line, and click the
FCC Part 15A above 1 GHz
Table 1
11 SCC-AI Series Isolated Analog Input Modules