Philips Avent Biberon Manual page 3

Before first use
Disassemble all parts, clean and then sterilize the
parts by placing in boiling water for 5 minutes or
sterilize by using a Philips Avent sterilizer. This is to
ensure hygiene.
Assembly
Make sure that you place the cap vertically onto the
bottle so that the nipple sits upright (see image for
more details). The nipple is easier to assemble into
the screw ring if you move it back-and-forth while
pulling it upwards instead of pulling it up in a
straight line.
Cleaning and storage
Clean all parts before each use to ensure hygiene.
After each use, disassemble all parts, wash in warm
soapy water, remove any food residues and rinse
thoroughly. Then sterilize using a Philips Avent
sterilizer or boil for 5 minutes. Make sure that you
wash your hands thoroughly and that the surfaces
are clean before contact with sterilized components.
During sterilization with boiling water, prevent
the parts from touching the side of the pot. This
can cause irreversible product deformation, defect
or damage that Philips cannot be held liable for.
Food colorings may discolor parts. This product is
dishwasher safe. Do not place in a heated oven.
Do not bring the bottle parts in contact or place
on surfaces with abrasive or antibacterial cleaning
agents. We recommend replacing feeding nipples
every 3 months. Keep feeding nipples in a dry,
covered container. Do not leave a feeding nipple