Terms Of Guarantee - Gerima SMA 20 APF-25.L1 Operating Manual

Hand-held beveling machine

Hide thumbs

Table Of Contents

Table of Contents

GERIMA shall guarantee a new machine for a peri-

od of twelve months beginning on the date the ma-

chine was purchased from the GERIMA production

facility in 66606 St. Wendel, Germany.

Any further guarantees shall require the prior writ-

ten agreement of both the machine owner and the

manufacturer.

The guarantee provides that the machine is free

from defects in materials and/or workmanship. Any

performance data contained In information or pro-

motional materials or included in quotations are

understood to be for guidance only and are not

guaranteed, as these values depend very strongly

on the material worked and the particular machin-

ing operation used.

Any guarantee claim submitted must state the ma-

chine identification number and must be accompa-

nied by the relevant delivery note or invoice.

Repairs under guarantee may only be carried out

by GERIMA or by one of its authorized specialist

retailer or representatives.

Guarantee claims can be made only for genuine

GERIMA parts and if the machine was used for its

intended purpose. The guarantee does not cover,

in particular: operational wear and tear; improper

use; partially or wholly disassembled machines;

damage arising from overloading the machine or

from the incorrect use of the grinding tool; the use

of non genuine, unauthorized or defective parts;

damage caused by the machine to the workpiece;

use of excessive force; consequential damage

arising from improper or inadequate maintenance

by the customer or a third party; damage caused

by unauthorized third parties or by the presence of

foreign matter; damage arising from a failure to

comply with the manufacturer's operating instruc-

tions, e.g. connecting the machine to the wrong

power supply.