Digital i/o board with high-speed isolation for pci (68 pages)
Summary of Contents for Contec POW150X
Page 1
このたびはPOW150Xをご購入頂きましてありがとうございます。 POW150Xは、ECH(PCI)シリーズおよびFA-PAC(PCI)シリーズの交換用電源です。 以下の事項を 参考にご使用ください。 Thank you for purchasing the POW150X. POW150X is a power supply for the exchange of the ECH(PCI) series and the FA-PAC(PCI) series. Please use it referring to the following matter. (1)商品構成 (This Product Includes) ・ 電源 (Power Supply)…1...
Page 2
POW150X User’s Manual (2)交換手順 (Exchange Process) 1) まず、電源コードをシャーシから外します。そして上面カバーを留めているネジを外し、 カバーを開けます。 First remove the power cord from the chassis. And remove the screws that hold in place the cover. Then open the cover. Cover Screw Rear Power Cord 2) バックプレーン、ファンの電源供給ケーブルをそれぞれ取り外します。 Remove the power connectors from the fan and backplane respectively.
Page 3
POW150X User’s Manual 3) 電源ユニットを留めている、背面3箇所と内側2箇所のネジを外し、電源ユニットを取り外 します。 Remove three screws on rear and two screws inside that hold in place of the power unit from the rear panel. Then take the used power unit out. Spring washer Washer 3-piece screws Power Supply...
Page 4
POW150X User’s Manual 5) 取り外すときと逆の手順でバックプレーン、ファンの電源供給ケーブルをそれぞれ接続し ます。 Connect between the fan and the backplane, and the power supply based on the following diagram, respectively. Front Back Plane Rear Power Supply 6) 取り外すときと逆の手順で、カバーを元通りネジ留めします。そして電源コードを接続し ます。 Fix the chassis cover with screws. Tighten the screws so that the cover is held in place.
Need help?
Do you have a question about the POW150X and is the answer not in the manual?
Questions and answers