VarTech Systems VT121 DiamondVue Series User Manual page 9

- - decrease the setting / moves the selector to the
previous function (under OSD menu on state)
Load factory default
Lock OSD menu (Function with signal input only)
Switch to next input source (under OSD menu off
state)
OSD Functions
Selection page
Select input source4
Auto Source Seek
Video system selection* 4
-
Press and hold SEL DN
button to power on the
controller
Press and hold MENU
button for 15 seconds to
enable / disable lock of the
OSD menu
+
Select input source to Analog RGB
Select input source to DVI
Select input source to S-Video 1
Select input source to Composite 1
Select input source to S-Video 2 (No function now)
Select input source to Composite 2 (No function now)
ON – Auto source select always enable OFF – Disable auto source select function
-
Press and hold SEL DN
button to power on the
controller
Press and hold MENU
button for 15 seconds to
enable / disable lock of
the OSD menu
+
9