VarTech Systems VT121 DiamondVue Series User Manual page 11

Exit
Position#
Autosetup
Frequency
Phase Image Horizontal
Position Image Vertical
Position
Exit
Utilities
OSD setting 4
Load Factory Default
Sharpness
Exit
Exit the OSD menu
Exit the OSD menu and save the settings
Auto adjust the positions, phase, frequency Yes No
Adjust the image horizontal size
Fine tune the data sampling position (adjust image quality) Use +/- to move the image
horizontally Press – or + (-+ ) Use +/- to move the image vertically Press – or + (-+ )
Exit the OSD menu
OSD Timeout : 0 / 10 / 20 / 30 / 40 / 50 / 60 seconds (Always on when set to 0) Press – or
+ (-+ ) OSD menu horizontal position Press – or + (-+ ) OSD menu vertical position Press –
or + (-+ )
Initialize the setting stored in non-volatile memory Adjust sharpness level Press – or + (-+ )
Total : 49 steps
Exit the OSD menu
11