Download
Share
Print this page
  1. Manuals
  2. Brands
  3. VarTech Systems Manuals
  4. Monitor
  5. VT14B-C1
  6. User manual

VarTech Systems VT14B-C1 User Manual

14” console mount auto sync color monitor
Hide thumbs

Advertisement

Quick Links

Download this manual
Solutions for Demanding Applications
VarTech Systems Inc.
Industrial CRT and Flat Panel Displays
14"
Console Mount
Auto Sync Color Monitor

MODEL NUMBER:

VT14B-C1
User's Guide
Read these instructions completely before attempting to operate your new Color Display.
14" Fast Scan Series User Guide
150-049

Advertisement

loading

Related Manuals for VarTech Systems VT14B-C1

Summary of Contents for VarTech Systems VT14B-C1

  • Page 1: Model Number

    Solutions for Demanding Applications VarTech Systems Inc. Industrial CRT and Flat Panel Displays 14” Console Mount Auto Sync Color Monitor MODEL NUMBER: VT14B-C1 User’s Guide Read these instructions completely before attempting to operate your new Color Display. 14” Fast Scan Series User Guide...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Sections Page Warning and Caution Operating Instructions 5BNC Connectors Controls Mode Operations Chassis Mount Mechanical Specifications 14” Fast Scan Series User Guide 150-049...

  • Page 3: Warning And Caution

    Section SAFETY WARNINGS SAFETY WARNINGS The following warnings and cautions are for your safety, for the prevention of injury from electric shock and for the safe operation of the monitor. Please read them carefully. Do not block the ventilation slots or insert any objects into the monitor through them. ♦...

  • Page 4: Operating Instructions

    Section OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Video Signal Correction The monitor is supplied with a 15pin HD connector (HD15F), 5BNC input connectors and an optional 9pin connector (DB9F) arranged as shown below: 75Ω ∗ DISABLED ENABLED* SWITCH *Factory Default 15 Pin D CONNECTOR: This is an industry standard connector providing easy connection to VGA type video sources.

  • Page 5: 5Bnc Connectors

    BNC CONNECTORS These connectors allow the monitor to work with Red, Green and Blue coaxial cable. The monitor synchronization may be Sync on Green, Composite sync or Separate Horizontal and Vertical sync. The “H” input is used for composite sync. Video inputs: Red, Green, Blue.

  • Page 6: Controls

    Section DIGITAL CONTROLS DIGITAL CONTROLS DIGITAL CONTROLS The digital controls are located on the rear side of the monitor. Digital Display Control Function Switch Contrast — Brightness — Horizontal Position — — Horizontal Size — Vertical Position (keystone)* — Vertical Size (pincushion)* Press Function button.

  • Page 7: Mode Operations

    MODE OPERATIONS In the normal mode of operation, the LED is not flashing. Disable Keypad 1. Press and release the FUNCTION (upper right) switch. The LED will now be flashing. 2. Simultaneously press the FUNCTION and the VT (upper left) switches. Note that the VT switch is not labeled.

  • Page 8: Chassis Mount Mechanical

    Section SPECIFICATIONS SPECIFICATIONS ENGINEERING SPECIFICATIONS Size 14” Pitch .28mm Resolution Capabilities CGA to XGA Active Display Area 11” x 8.3” / 279.4mm x 210.82mm Deflection Angle 90º Phosphor Medium Short B22 Power Source 90 - 265 volts AC autoranging 50/60 Hz, 1.5 amps ac Power Consumption 90 Watts Horizontal Frequency...
  • Page 9 VARTECH SYSTEMS INC. HEADQUARTERS 11529 Sun Belt Ct. Baton Rouge, Louisiana 70809 Toll-Free: 800.223.8050 International Phone: 001.225.298.0300 Fax: 225.297.2440 E-mail: sales@vartechsystems.com www.vartechsystems.com 150-049-001 6.17.03 14” Fast Scan Series User Guide 150-049...