Planika Galio Star Corten Installation And User Manual

Planika Galio Star Corten Installation And User Manual

Hide thumbs Also See for Galio Star Corten:

Advertisement

Quick Links

INSTALLATION and USER'S MANUAL
Galio Star Corten
G20/G25 (Natural Gas) G30/G31 (Propane-Butane/Propane)
H1
H2
D1
D2
[mm]
320
10
595
950
Copyright Planika Sp. z o.o.
www.planikafires.com
IG0295#00
21.06.2021
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Galio Star Corten and is the answer not in the manual?

Questions and answers

Summary of Contents for Planika Galio Star Corten

  • Page 1 INSTALLATION and USER’S MANUAL Galio Star Corten G20/G25 (Natural Gas) G30/G31 (Propane-Butane/Propane) [mm] Copyright Planika Sp. z o.o. www.planikafires.com IG0295#00 21.06.2021...
  • Page 2: Table Of Contents

    T IS OBLIGATORY TO READ AND KEEP THIS INSTRUCTION MANUAL TABLE OF CONTENTS INTRODUCTION ..................................3 SAFETY INSTRUCTIONS ................................3 Safety instruction regarding the use of the gas cylinders....................4 INSTALLATION .................................... 5 3.1. Box contents ..................................5 3.2. Unboxing and installation ..............................
  • Page 3: Introduction

    • During the first ignition the Galio Star Corten fireplace needs to be burnt on maximum level for a few hours in order for the elements to acquire correct temperature and for the remains of paint, lacquer and lubricant to evaporate.
  • Page 4: Safety Instruction Regarding The Use Of The Gas Cylinders

    • If the Galio Star Corten is not in use for a longer period of time (e.g. winter time), we advise you to store it inside. • Corrosion of the coating of the base of Galio Star Corten is a natural process resulting from the characteristics of the Corten steel which the fireplace is made of.
  • Page 5: Installation

    Picture 2 • In the case of Galio Star Corten powered with natural gas, to obtain the optimum image of the flame, cover the burner with a single layer of decorative stones leaving some spaces uncovered of approximately every 2-3 cm (Picture 2).
  • Page 6: Gas Cylinder Montage (Only Lpg Version)

    Before proceeding with the connection of the gas cylinder to the fireplace all activity regarding the correct placement and installation of the Galio Star Corten needs to be already performed. Place the gas linkage away from hot or sharp edges and make sure it is not twisted.
  • Page 7: Connection And Replacement Of The Gas Cylinder (Lpg Version)

    3.4.2. Connection and replacement of the gas cylinder (LPG version) The Galio Star Corten is delivered together with an elastic gas linkage which, on one end is connected to the valve of the device and on the other end to the 37mbar regulator (in the twist-on version) ready to be connected to the gas cylinder.
  • Page 8 Gas cylinder connection Twist-on connection Quick-release 1. Check if the bottle valve is TURNED OFF turning Remove the protection tip. Do not use any tools, it clockwise leave the tip hanging freely. 2. Remove the protection tip and store it for later use.
  • Page 9 Disconnection of the gas cylinder Twist-on connection Quick-release Turn off the Galio Star Corten – put it into the OFF position. The main and pilot burner need to be turned off. 2. Turn the bottle valve into the OFF position 2.
  • Page 10: Regulator Replacement (Lpg Version)

    5 years. Allowed pressures: 30 mbar, 37 mbar (recommended), 50 mbar. Use only the redactors that comply with the EN16129 European Norm. 2. Turn off the Galio Star Corten – the „OFF” position. The main burner and the pilot burner need to be turned off.
  • Page 11: Operating Instructions

    4. OPERATING INSTRUCTIONS The Galio Star Corten fireplace has a remotely control valve with a built-in ignition for the pilot flame. The flame height of the main burner may be appropriately regulated by remote control or Touch Panel. Picture 5: Hand-held transmitter and Touch Panel 4.1.
  • Page 12 • The batteries are placed battery holder located at the bottom of Galio Star Corten. (See Picture 7). Picture 7: Receiver batteries containers • Unscrew the cover of the battery container with a screwdriver and remove the battery box outside Picture 8: Removing of the battery container •...
  • Page 13: Remote Control (If Delivered)

    4.3. Remote control (if delivered) GaLiO Fire Pit Insert can be operated by radio remote control. This comprises a hand-held transmitter and a receiver. The receiver is part of the gas control block assembly. • Electrical connections and batteries: Hand-held transmitter: 2x 1.5V AAA battery Receiver: 4x1.5V AA battery or 6 VDC •...
  • Page 14: Stand-By Mode (Pilot Flame)

    • Once the pilot light is burning, the main burner must ignite within 10 seconds automatically. If this does not happen, immediately close the gas tap and warn the fitter. • If the main burner ignites with a pop immediately close the gas tap and warn the fitter. •...
  • Page 15: Flame Height Directly To Minimum Position

    4.3.4. Flame height directly to minimum position „-“ Pressing the button twice automatically decreases the flames to the LOW position NOTE: Flame goes to high fire first before going to low fire. Backlight must be on for low fire double-click operation! 4.3.5.
  • Page 16: Touchpad

    The programmed length of inactivity to activate the system is specified by the appliance manufacturer and cannot be altered in the field. 4.4. Touchpad Depending on customers preferences Galio Star Corten Remote may be additionally operated Touch panel. Additionally behind Wall Switch the battery box can be placed. Picture 10: Touch panel To Turn ON Appliance •...
  • Page 17: Checking For Gas Leaks

    If the problem happens again please contact the dealer. 5.2 Checking the flame appearance. • Burn the Galio Star Corten on max flame height and check the appearance of the flame. • The flame should be linear and evenly placed on the whole length of the main burner.
  • Page 18: Troubleshooting

    TROUBLESHOOTING Warning! Montage, upkeep and service need to be conducted by a qualified professional with appropriate qualification, an appropriate company or the gas supplier. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION CLOSE THE VALVE ON THE GAS CYLINDER IMMEDIATELY. DO NOT USE THE DEVICE UNTIL SMELL OF GAS LEAKS HAVE BEEN REMOVED.
  • Page 19: Warranty

    9. WARRANTY Planika Sp. z o.o. grants the Client guarantee of quality for the smooth operation of the goods specified on the sales document. The warranty is determined for a given period from the date of purchase (based on the warranty card together with the receipt of purchase).
  • Page 20 SELLER Name: Address: Tel/fax: Date of sale: Seller’s seal and signature BUYER Name: Address: Tel/fax: Date of purchase: The gas fireplace should be installed by a qualified Installer in accordance with the applicable national building regulations and in accordance with the guidelines contained in the Installation and User's Manuals. I hereby declare that having read the User's Manual and the Guarantee Conditions.

This manual is also suitable for:

G20/g25G30/g31

Table of Contents