Subscribe to Our Youtube Channel
Related Manuals for H3C LSWM116FC
Summary of Contents for H3C LSWM116FC
- Page 1 H3C LSWM116FC Interface Cards User Manual New H3C Technologies Co., Ltd. http://www.h3c.com Document version: 6PW102-20201120...
- Page 2 All rights reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd. Trademarks Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners.
-
Page 3: Table Of Contents
Contents About the LSWM116FC interface card ··············· 1 Important information ································································ 1 Front panel ··············································································· 1 Ports ·································································· 2 Important information ································································ 2 SFP28 ports ·············································································· 2 LEDs ·································································· 7 Important information ································································ 7 SFP28 port LEDs ······································································ 7 Installing and removing an interface module ······ 9 Installing an interface module ···················································... -
Page 4: About The Lswm116Fc Interface Card
About the LSWM116FC interface card Important information The LSWM116FC interface card is applicable to multiple H3C switch models. For the interface card compatibility with switches, contact H3C Support or marketing staff. Front panel The LSWM116FC interface module provides 16 SFP28 ports and supports fibre channel (FC) transceiver modules of various data rates. -
Page 5: Ports
Ports Important information • As a best practice, use H3C transceiver modules and cables for the interface cards. • The transceiver module and cable types supported by the LSWM116FC interface card vary by device model. For more information, see the installation guide or hardware reference for the device, or contact H3C Support or marketing staff. - Page 6 SFP transceiver Central wavelength Connector module (nm) SFP-GE-LX-SM1310-A 1310 SFP-GE-LH40-SM1310 1310 SFP-GE-LH40-SM1550 1550 SFP-GE-LH80-SM1550 1550 Table 2 SFP transceiver modules available for the SFP28 ports (2) Cable/fiber Modal transceiver diameter bandwidth transmission module (µm) (MHz × km) distance SFP-GE-T Twisted pair 100 m (328.08 ft) 550 m (1804.46 ft) Multi-mode,...
- Page 7 Cable/fiber Modal transceiver diameter bandwidth transmission module (µm) (MHz × km) distance SFP-GE-LH Single-mode, 40 km (24.86 40-SM1550 9/125 miles) SFP-GE-LH Single-mode, 80 km (49.71 80-SM1550 9/125 miles) Table 3 SFP+ transceiver modules available for the SFP28 ports Central SFP+ transceiver module Connector wavelength (nm) SFP-XG-SX-MM850-A...
- Page 8 Table 4 SFP+ transceiver modules available for the SFP28 ports Modal SFP+ Fiber bandwidth transceiver diameter transmission (MHz × module (µm) distance 2000 300 m (984.25 ft) Multi-mode, 82 m (269.03 ft) 50/125 SFP-XG-SX- 66 m (216.54 ft) MM850-A 33 m (108.27 ft) Multi-mode, 62.5/125 26 m (85.30 ft)
- Page 9 Modal SFP+ Fiber bandwidth transceiver diameter transmission (MHz × module (µm) distance 70 m (229.66 ft) Multi-mode, 21 m (68.90 ft) 62.5/125 15 m (49.21 ft) 150 m (492.13 ft) 50 m (164.04 ft) SFP-FC-16 35 m (114.83 ft) G-SW-MM8 380 m (1246.72 ft) Multi-mode, 2000...
-
Page 10: Leds
SFP-XG-D-AOC-20M 20 m (65.62 ft) LEDs Important information The indications of the LEDs on the LSWM116FC interface card vary by device model. For more information, see the installation guide or hardware reference for the device. SFP28 port LEDs Table 7... - Page 11 Table 7 SFP28 port LED description LED status Description A transceiver module is installed in the port and a link is present on the port. Flashing The port is sending or receiving data. No transceiver module is installed in the port, or no link is present on the port.
-
Page 12: Installing And Removing An Interface Module
Before you install an interface module, remove the filler panel (if any) from the target slot. Keep the removed filler panel secure for future use. To install an interface module: Unpack the interface module. Figure 2 LSWM116FC interface module (1) Ejector lever (2) Latch... -
Page 13: Removing An Interface Module
Rotate inward the ejector lever as shown by callout 2 in Figure 3 until the latch locks the ejector lever in place. Figure 3 Installing an LSWM116FC interface module Removing an interface module CAUTION: •... -
Page 14: Installing And Removing Sfp And Sfp+ Transceiver Modules And Sfp+ Cables
Figure 4 Removing an LSWM116FC interface module Installing and removing SFP and SFP+ transceiver modules and SFP+ cables For information about installing and removing SFP/SFP+ transceiver modules and SFP+ cables, see H3C Transceiver Modules and Network Cables Installation Guide at www.h3c.com.hk. -
Page 15: Verifying The Installation
After the installation is complete, identify whether the interface module is operating correctly. If the interface module fails to operate correctly, perform the following steps: Reinstall it following the installation procedures described in this document. If the problem persists, contact H3C Support.
Need help?
Do you have a question about the LSWM116FC and is the answer not in the manual?
Questions and answers