Table of Contents
Advertisement
Quick Links
H3C LSWM116Q interface card
▌Introduction
Overview
The LSWM116Q interface card provides 16 QSFP+ ports.
Figure 1 Front panel
(1) QSFP+ port LED
QSFP+ ports
Table 1
and
Table 2
describes QSFP+ cables available for the QSFP+ ports on the card.
Table 1 QSFP+ transceiver modules available for the QSFP+
ports (1)
QSFP+ transceiver
module
QSFP-40G-SR4-M
M850
QSFP-40G-CSR4-
MM850
QSFP-40G-LR4-PS
M1310
QSFP-40G-BIDI-SR
-MM850
user manual-6PW104
describe QSFP+ transceiver modules and
Central wavelength
(nm)
850
850
1310
850
(2) QSFP+ port
Connector
MPO (PC polished,
12-fiber)
MPO (PC polished,
12-fiber)
MPO (APC polished,
12-fiber)
LC
1
Table 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for H3C LSWM116Q
Summary of Contents for H3C LSWM116Q
- Page 1 H3C LSWM116Q interface card user manual-6PW104 ▌Introduction Overview The LSWM116Q interface card provides 16 QSFP+ ports. Figure 1 Front panel (1) QSFP+ port LED (2) QSFP+ port QSFP+ ports Table 1 Table 2 describe QSFP+ transceiver modules and Table 3 describes QSFP+ cables available for the QSFP+ ports on the card.
- Page 2 QSFP+ transceiver Central wavelength Connector module (nm) Four lanes: • 1271 QSFP-40G-LR4-W • 1291 DM1300 • 1311 • 1331 Four lanes: • 1271 QSFP-40G-LR4L-W • 1291 DM1300 • 1311 • 1331 Table 2 QSFP+ transceiver modules available for the QSFP+ ports (2) QSFP+ Cable/fiber...
- Page 3 QSFP-40G-D-AOC-20M 20 m (65.62 ft) NOTE: • As a best practice, use H3C transceiver modules and cables for the interface card. • The transceiver module and cable types supported by an interface card vary by device model. For more information, see the installation guide or contact H3C Support or marketing staff.
-
Page 4: Installing The Card
• To avoid device damage, do not use excessive force when you install or remove the card. • The LSWM116Q interface card is hot swappable. However, do not install or remove it during the startup of the switch. Installing the card 1. -
Page 5: Removing The Card
5. Rotate inward the ejector lever as shown by callout 2 in Figure 3 until the latch locks the ejector lever in place. Figure 3 Installing an LSWM116Q interface card Removing the card 1. Prepare an anti-static bag. 2. Remove the cables from the card. -
Page 6: Verifying The Installation
▌Technical support New H3C Technologies Co., Ltd. provides customers with comprehensive technical support and service. If you purchase the products from the sales agent of New H3C Technologies Co., Ltd., please contact our sales agent or technical personnel. Website: http://www.h3c.com...
Need help?
Do you have a question about the LSWM116Q and is the answer not in the manual?
Questions and answers