Page 1
H3C LSPM6QP2PS interface card user manual-6PW101 Introduction Overview The LSPM6QP2PS interface card provides two 20G QSFP+ ports. Figure 1 LSPM6QP2PS interface card (1) QSFP+ port LED (2) QSFP+ port (3) Captive screw (4) Ejector lever NOTE: The switch models that the interface card is applicable to may change over time.
Page 2
20 Gbps. NOTE: H3C recommends that you use H3C QSFP+ DAC cables for the QSFP+ ports on the interface card. The QSFP+ DAC cables available for the interface card are subject to change over time. For the most recent list of QSFP+ DAC cables available for the interface card, contact H3C Support or marketing staff.
Page 3
• Flat blade screwdriver. • ESD wrist strap. • The installation tools are not provided with H3C devices. Prepare them yourself. Installing the interface card This guide uses the S5130-30C-HI switch as an example. To install the interface card: Use the Phillips screwdriver to remove the screw on the filler panel in...
Page 4
Figure 2 Removing a filler panel Figure 3 Installing the interface card...
Page 5
Place the removed interface card in the anti-static bag. Figure 4 Removing the interface card Installing and removing QSFP+ DAC cables For information about installing or removing QSFP+ DAC cables, see H3C QSFP+ Transceiver Modules and DAC/AOC Cables Installation Guide at www.h3c.com.
Page 6
Technologies Co., Ltd. provides customers with comprehensive technical support and service. If you purchase the products from the sales agent of New H3C Technologies Co., Ltd., please contact our sales agent or technical personnel. Website: http://www.h3c.com.hk E-mail: service@h3c.com BOM: 3101A0K4...
Need help?
Do you have a question about the LSPM6QP2PS and is the answer not in the manual?
Questions and answers