Troubleshooting - Scandomestic Scancool SD 46 E User Manual

TROUBLE SHOOTING:
The design and production comply with the relative security standard of China. If you find it
does not work as usual, please examine and handle it according to the following table first.
If the situation does not improve, you must contact our aftersale servicecenter or our spe-
cial repair division to examine and repair the appliance.
The following problems are not causes of breakdown:
There is a sound of liquid flowing in the freezer
It is the sound of refrigerant flowing in the circulating pipeline of the refrigerating system.
It is normal.
Too noisy
The freezer is not installed in a level ground. Change the position.
The refrigerating system does not work for a long time but the inside temperature is very
low
It is an indicator of high quality for its good insulation and low cooling retention low.
It is normal.
Trouble Possibilities
Compressor Power is off
does not work
The thermostat knob is not in the proper
position
Compressor The tempera-
keeps on ture inside is too
working high
The tempera-
ture inside is OK
Too noisy The floor is not level
The screw in fan or condenser is loose
The refrigerating circuits touch each other
Check up
The fuse is broken Check the fuse
The connection bet- Check the socket
ween plug and socket is
not good
The circuit of input and Make sure that the
output is out of use power is on
Check the thermostat
Frost on the evaporator Check whether the
is too thick frost is thicker than 6-
8mm
The door is being ope-
ned too frequently
Too much food has
been stored at once
The ambient tempera- Make sure whether the
ture is too high .while knob is indica- ting at
the thermostat indica- the"5-6"(or deeper)
tes a small number
The thermostat does
not work
Make sure that the
freezer is level
The screw is loose
Solutions
Replace the fuse
Repair or replace the socket
Check the circuit with electric
instrument
Rotate the thermo- stat to the
proper position
Defrost regularly
Reduce the times of opening
Take out some of the food
Adjust the thermostat knob
Replace the thermo- stat
Put pad under the castors
Rotate the fixed screw
Separate them
Remarks
If it is necessary plea- se
contact after-sales service for
repair
Ask for professional help
The thermostat knob on"2-
4"is better(or proper)
Ask for after-sales service