Care And Maintenance; Troubleshooting; Technical Data - Scandomestic Scancool XS 701 User Manual

Display freezer
Table of Contents

Advertisement

CARE AND MAINTENANCE

MAINTENANCE AND CLEANNESS:
1 Do not open the door frequently and too long to save en- ergy.
2 Never leave heavy or hot stuff on the top of the showcase to avoid deforming.
3 Cut off the power before cleaning.
4 To clean the showcase, please use soft cloth dampened in some moderate
detergent and hot water.
5 Use warm water to clean oil or fruit juice stain on the magnetic gasket in order
to keep its elasticity. Apply some talcum powder to it to prolong its service life.
6 The showcase should not be left unused for a long time, to stop using the
showcase, disconnect the main power first, then clean the inside and leave the
door open for 2~3 days to dry it.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
respon- sibly to promote the sustainable reuse of ma- terial resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for environmental safe re- cycling.

TECHNICAL DATA:

Model ............................................................................................... XS 701E
Classfication of anti-electic shock ......................................................................... I
Capacity, (L) ........................................................................................... 701
Effective Volume, (L) ............................................................................... 501
Net Weight, (kg) ...................................................................................... 105
Overall Dimension (mm) ........................................................ 1865x815x850
TROUBLE SHOOTING:
Unfreezing
Temperature control is on the highest point
Adjust the temperature
-
Plug and outlet not connected well
Make they two connect well
-
Fuse broken off
Change the fuse
-
Compressor can not stop working
Temperature control is on the lowest point
Adjust temperature control
-
Too much stuff stored in one time
-
Reduce the quantity
Thick frost
Defrost
-
Too much times of door-opening
-
Reduce the times of door-opening
Too near the wall
Far from the wall
-
Near the hot source or sun
-
Change the place
Big noise
Ground is not flat
-
Change the place
Refrigerating tubes connected
Separate them
-
REMARK: If you can not solve the troubles according to the a-bo
ve-mentioned ways, please contact the after-sale service, do not
handle it yourself.

Advertisement

Table of Contents
loading

Table of Contents