Installation - Hyundai DVBT421U Instruction Manual

1.2 Radio Channel List
Open Radio Channel List if there is any radio channel that has been detected through auto
scan.
Refer to the operation of TV Channel List (Item 1.1) for detailed instructions.
1.3 Delete All favorites
Press OK to get to this setup item, then delete all favorite TV channels and radio channels that
have been edited following the navigation guidance on the screen.
1.4 Delete All
Press OK to get to this setup item, then delete all stored TV channels and radio channels accor-
ding to the guide on the screen.
1.5 Group Rename
Select Group Rename and press OK button to enter this menu, then use ▲/▼ button to select
a group from the list, press OK button again to bring up a window of soft keyboard for renaming
a group. Once the group is renamed, click OK button on the soft keyboard to confirm, or press
EXIT button to cancel and quit. User can also click ESC key on the soft keyboard to exit.

2. INSTALLATION

Select Installation in the Main Menu and press OK button to open it. It consists of three subme-
nus:
• Auto Scan
• Channel Scan
• Tuner Setting
Use ▲/▼ button to select a submenu, OK button to enter the chosen submenu, ◄/► button to
shift the setting options available, EXIT button to quit.
2.1 Auto Scan
Select and enter submenu Auto Scan which contains the following information:
• Scan Mode: Free (free channels), All (all channels available);
• Search:
Use ◄/► button to choose a preferred scan mode, either All or Free, then move the cursor to
Search and press OK button to confirm the operation of auto scan. As auto scan is under way,
all channels (TV channels and radio channels) that have been detected will be listed respecti-
vely in the window. Under the window are the constantly changing data concerning frequency
band, frequency, channel No. modulation type etc..
Once the scan is completed, the receiver will play the first TV channel automatically. User can
use CH+/ CH- button to shift channels as he likes or press OK button to pop up TV Channel
List and select a preferred channel to enjoy. Or press TV/ R button to toggle between TV
channel and radio channels.
2.2 Channel Scan
Select and enter submenu Channel Scan which contains the following contents:
• Scan Mode: By Channel or By Frequency.
Scan a particular channel by the exact channel Number or frequency. For By Channel
mode, user will have to set Scan Band, Ch No. and Network Search in the meantime. For
By Frequency mode, user will have to set the correct Frequency and Bandwidth parameters
together.
• Scan Band: VHF or UHF.
Scan channels within either VHF (Very High Frequency) or UHF (Ultra High Frequency) or
both bands. Such setting is active only in By Channel mode.
• Ch No.: Channel 5~12 ( VHF), or Channel 21~69(UHF) Choose the exact channel number to
search for a designated channel. Active only in By Channel mode.
EN - 61
EN