User interFace
1.QUicK installation
1.1 setting country and language
User can select preferred country and language at setup - installation page.
(1) Press <Menu> button to enter main menu.
(2) Press <Left/Right> button to select setUp option. See Figure 1.
(3) Press <Up/Down> button to select installation option.
(4) Press <OK> button to enter installation page. See Figure 2.
(5) Press <Up/Down> button to select country option.
(6) Press <Left/Right> button to set country setting.
(7) Press <Up/Down> button to select osD language option.
(8) Press <Left/Right> button to set a language.
If there is no channel database in the STB, it will start at step (5) directly when booting.
Figure 1. Main Menu - SETUP
Figure 2. SETUP - Installation
1.2 how to receive the programs?
Scan the possible frequency and bandwidth to receive the programs. Press <RED> or
<GREEN> button to start auto scan or manual scan.
1.2.1 auto scan
auto scan will erase the database first, and scans default frequency and bandwidth by count-
ry setting. Follow the steps (1) ~ (8) at section 1.1.
(9) Press <RED> button to be confirmed to clear the database.
(10) Press <OK> button to confirm clear action and start auto scan.
It costs time to do auto scan, user can press <Exit> button to exit at anytime. See Figure 3.
Later if you want to scan again, you can follow above Quick Installation procedure.
EN - 48