Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ...............................2 Important safeguards ............................3 Installation/ connection............................4 Controls................................7...
Important safeguards Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT PASSENGER COMPARTMENT RECOMMENDED TEMPERATURE! Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating.
Installation/ connection This unit can be installed in any dashboard having an opening as shown on the picture. The dashboard should be ~ 4.5 – 5.5 mm thick in order to be able to support the unit. First complete the electrical connections, and then check them for correctness. Installation opening 1.
Electrical connection Note: For your driving safety, please link your parking wire with low power level, and keep it controlled by manual brake switch. Wire should be high power level and the unit cannot play video disc. Caution: Do not interchange the connection of the wiring!!!
Page 6
For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
Controls Front panel 1. BAND button In Radio mode press it repeatedly to select your desired radio band. 2. PTY button In Radio mode press it to activate the PTY function. 3. TFT display 4. P.SCN button In Radio mode press it to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds.
Page 8
5. OPEN button Press it to open the monitor. 6. Joystick with buttons/ ENTER Use the buttons to select the menu item. Press ENTER to confirm. Use the buttons to select the title, track. Press ENTER to confirm. Use the buttons to show next frame.
Page 9
Press and hold for 2 seconds the <</INT button to start intro playing (10 seconds). Press and hold for 2 seconds the >>/RDM button to start random playing. 15. MUTE button Press it to cut down the volume output, press it again to resume volume. 16.
Page 10
Monitor 1. BAND button 2. PTY button 4. P.SCN button 5. OPEN button 21. LCD monitor 22. BAND button In Radio mode press it repeatedly to select your desired radio band during. 23. SETUP button In DVD mode press it to open the setup menu. 24.
Page 11
Remote control 1. IN/OUT button Press it to select the monitor horizontal position. 2. STANDBY button – press it to turn the power on/off. 3. OSD button - Press it to show the menu on display. 4. EJECT button - press it to eject the disc. 5.
Page 12
14. RDM/BAND button – in DVD mode press it to start random playing. In Radio mode press it to select the desired band. 15. Digit area 16. TILT button - press it to adjust monitor tilt angle. You can set tilt adjustment angle from 3 level to 5 levels. 17.
Page 13
Changing the battery 1. Press the catch and at the same time pull out the battery tray. 2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control. Warning: Store the battery where children cannot reach.
Monitor operations Open/close the monitor Press the OPEN button to open the monitor to the last viewing position. Press it again to load the monitor into the unit. Monitor auto close To set the monitor auto close function on press the OSD button, press the cursor buttons to select SYSTEM =>...
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the POWER button on the panel and hold it for about 10 seconds to restore the unit to the original factory settings.
Page 16
Setting the audio and video characteristics Press SEL button repeatedly to select the audio modes: BASS => TREBLE => BALANCE L-R => FADER R-F => BRIGHT => CONTRAST => COLOR => SHARP. Rotate VOL knob or press the +/- buttons on the RC to adjust the mode. Press ENTER/joystick to confirm and return to the modes list or wait for 5 seconds to return to normal mode.
Page 17
TA VOL: in DVD or RADIO mode rotate VOL knob or press the +/- buttons on the RC to select the TA volume level (16-42). Press ENTER/joystick to confirm and return to the modes list. To exit the list and return to normal mode wait for 5 seconds.
Digital tuner operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press the MODE button to select RADIO mode. Press the BAND button on the panel or RDM/BAND button on the RC to select: FM1, FM2, FM3, AM1, AM2.
Page 19
Preset scan function Preset scan: Press the P.SCN button on the panel or press and hold for 2 seconds the RPT/P.SCN button on the RC to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds.
Disc glossary PBC (PlayBack Control) PBC is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image.
Disc operations Discs for playback This unit can play disc types: CD/DVD/DVD±R/±RW/CD-R/-RW/CDDA. Compatible with formats: DVD-video/SVCD/VCD/HDCD/MP3/MP4/WMA/JPEG/DivX/MPEG4. The following file types are supported: Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) Picture file: JPEG (*.jpg) ISO 9660 or ISO 9660 +Joliet format - Max.
Page 22
Loading a disc 1. Turn the power on. 2. Insert the disc with the printed side facing upward into the slot. The DVD mode will be turned on automatically. The monitor will show the disc content. 3. Press EJ button on the panel to eject the disc. Playing/ pausing To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
Page 23
Fast forward and backward playback Press the <</>> buttons on the panel or the buttons on the RC to select the speed of fast playing in backward or forward direction: X2, X4, X8, X16, X32. Press the PLAY/PAUSE button to return to normal playback.
Intro playback You can play the beginning of every track for 10 seconds in sequence. Press and hold for 2 seconds the <</INT button on the panel to start intro play. Press again to cancel. Disc menu navigation (for DVD only) 1.
Page 25
7. Press the ENTER/joystick button again to confirm. 8. Press the button to return to menus list. 9. In the menus list press ENTER/joystick to close them. Source menu Select the source: TUNER, DVD, TV (option), CDC (option, when CD changer is connected), AUX.
Page 26
Normal (return to normal screen mode). System menu Tilt (select Auto or Manual monitor closing), In/out fix (select monitor horizontal position: Level none: can be moved from position 1 to 3; Level 1: fixed 1 position; Level 2: fixed 2 positions; Level 3: fixed 3 positions), Tilt range (adjust the monitor angle: Auto: 5 steps can be changed;...
MP3 overview Notes on MP3: MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write.
Page 28
Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate o f 128 kbps. DO NOT store more than 448 MP3 files per disc. For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory (folder).
System setup 1. Press the SETUP button to display the setup screen. 2. Use the cursor buttons to select the desired menu: General setup, Audio setup, Video setup, Preference setup, Password, Exit the menu. 3. Press to enter it. 4. Use the cursor buttons to select the desired setting.
Page 30
LAST MEMORY When this function is on, the unit can memorize the time elapsed from the last time you played the disc. Then at the next playing, it will resume playing from the memorized time. Audio setup page SPEAKER SETUP DOWNMIX LT/RT: The audio out is Left and Right channels format even if the original sound is 5.1 CH format.
Page 31
DYNAMIC If watching large dynamic scope movie program at night, to select this mode you can reduce the volume to a very low level, at the same time, to keep the fine details sounds. In this case, this doesn't disturb the family and keep the quality sounds. EQUALIZER EQ TYPE 8 EQ modes are available.
Page 32
Preference page TV TYPE This unit is suitable for all kinds of TV systems. You can select one of the PAL, NTSC or Multi. Multi: the TV system is auto switched according to the disc system. NTSC: this system is used in USA, Taiwan, Japan etc. PAL: this system is used in China, Europe, Hong Kong etc.
Page 33
Password setup page PASSWORD MODE Set the password function to On or Off. On: the parental control can be changed in the PARENTAL submenu (Preference page). Off: you cannot change the parental control in Parental submenu. PASSWORD When the password mode is ON you can change the password. Select PASSWORD =>...
Handling discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Troubleshooting guide Cause Solution Symptom General The car ignition is not on. If the power supply is properly connected to the car No power The fuse is blown. accessory switch the ignition key to “ACC”. Replace the fuse. Disc Presence of disc inside the player. Remove the disc in the player then put a new Disc cannot be loaded.
Page 36
The radio does not work, The antenna cable is not connected the Insert the antenna cable firmly select a station the radio station signals are too weak. manually. automatic selection does not work.
Specification General Power supply: 12 V DC Current consumption: max. 10 A Maximum power output: 50 W x 4 channels Compatible formats: DVD/DVD±R/±RW/CD-R/-RW/SVCD/VCD/HDCD/CD/MP3/MP4/ WMA/CDDA/JPEG playback/DivX/MPEG4 Dimensions (L x W x H) / weight: 178 x 50 x 190 mm / 2.5 kg Working temperature range: -10º...
Page 38
Audio specification Maximum output: 2 Vrms (+/- 3 dB) Frequency response: 20 Hz - 20 KHz S/N ratio(A-vtd): 90 dB Separation 80 dB Line out Output: CD max 2000 mV Specifications are subject to change without notice. Mass and dimension are approximate.
Page 52
OPEN, OSD. : SYSTEM => TILT. TIL : AUTO ( MANUAL ( OPEN. TILT OSD. : SYSTEM => TILT RANGE. TIL RANGE ( ): 1-3, 1-4, 1-5, Auto ( IN/OUT OSD. : SYSTEM => IN/OUT FIX. : 3, 4, Auto ( , 5).
Page 63
START ( EXIT (OSD) OSD. : Source menu ( ), Audio menu ), Video menu ( ), Screen menu ( ), System menu ENTER/ ENTER/ ENTER/ Source menu ( TUNER ( TV ( CDC (...
Page 64
Audio menu ( Bass Treble Balance Sub woofer ( : On ( .)/ Off ( Beep sound ( : On ( .)/ Off ( Start volume. ( 20.) Video menu ( Bright ( Contrast ( Color ( Sharpness ( Screen menu ( Picture ( Full ( Normal (...