Table of Contents
Advertisement
Series SD Family — Back Views in Scale
NOTE: The SD model number determines which diagram applies to your unit.
Figure 10a — 1/32 DIN with
1 2 3 4
5 6 7
8 9 1 0 1 1
a Universal Process Output in-
stalled for output 1
(S D 3 _ - _ F _ _ - _ _ _ _).
1 2 3 4 5 6
8 9 1 011
Figure 10b — 1/32 DIN with
other than a Universal Process
Output installed for output 1
(S D 3 _ - _ (C,K or J) _ _ - _ _ _ _).
Figure 10e — 1/8 DIN Horizontal with a
Universal Process Output installed for output 1
(S D 9 _ - _ F _ _ - _ _ _ _).
Figure 10f — 1/8 DIN Horizontal with other
than a Universal Process Output installed for
output 1 (S D 9 _ - _ (C,K or J) _ _ - _ _ _ _).
Figure 10i — 1/4 DIN with a Universal
Process Output installed for output 1
(S D 4 _ - _ F _ _ - _ _ _ _).
Wat lo w Se rie s S D
Wat lo w Se rie s S D
Figure 10c — 1/16 DIN
with a Universal Process
Output installed for output 1
(S D 6 _ - _ F _ _ - _ _ _ _).
Figure 10g — 1/8 DIN
Vertical with a Universal
Process Output installed for
output 1
(S D 8 _ - _ F _ _ - _ _ _ _).
Figure 10j — 1/4 DIN with other than a Universal
Process Output installed for output 1
(S D 4 _ - _ (C,K or J) _ _ - _ _ _ _).
10
1 0 •
•
•
•
Figure 10d — 1/16 DIN with other
than a Universal Process Output in-
stalled for output 1
(S D 6 _ - _ (C,K or J) _ _ - _ _ _ _).
Figure 10h — 1/8 DIN Vertical
with other than a Universal Process
Output installed for output 1
(S D 8 _ - _ (C,K or J) _ _ - _ _ _).
NOTE:
Terminals 12, 13 and
14 are not installed on
controllers without an
output 3 (SD _ _-_ _ _ A-
_ _ _ _).
Chapter 2 Install and W i re
Tabl e of Conte nts
Advertisement
Table of Contents
