Table of Contents
Advertisement
Figure 6-9. Materials for Cleaning the High Range Piston Cylinder
1. Prepare a clean work area near a running tap water source. Prepare several sets of
folded wipers as shown in Figures 6-2, 6-3 and 6-4. Two wipers can be folded
together for wiping the outside of the piston and cylinder. Prepare several twisted
wipers as shown in Figures 6-10, 6-11, and 6-12 to wipe the bore of the cylinder.
2. Disassemble the piston/cylinder assembly.
3. Insert the retaining clip from the bottom of the piston into the installation tool, rinse
with solvent and set aside. Pre-clean the piston and cylinder using solvent soaked
wipers. Prepare additional wipers as necessary for drying the piston and cylinder
once they have been washed with soap and water.
Figure 6-10. Preparing Kimwipes for Cleaning the High Range Cylinder - Step 1
Piston/Cylinder Cleaning Instructions
Cleaning the 35 Bar Piston/Cylinder Assembly
6
glg26.eps
glg27.eps
6-9
Advertisement
Table of Contents
