Calculated Industries ConcreteCalc Pro 4225 Pocket Reference Manual page 8

c
p
; p
c 5
; 5
b
exceeding 6 inches in
diameter (e.g., 5 / 8
r for 5/8 inch bar
size). Default is
number 5 (5/8").
Spacing — Stores
rebar on-center spacing.
Default is 18".
Loads Key — Calculates
number of loads for a given
Volume or Length, Width,
and Height (Depth) values
and stored load size.
Load Size — Stores load
size. Load size must be
entered as a cubic value
(e.g., 8 y y y
; p). The default
size is 8 cubic yards.
Bags — Calculates
number of concrete bags
for a given Volume and
stored bag size.
Bag Size — Stores bag
size (Volume per bag of
concrete). Bag size must
be entered as a cubic
value (e.g., . 6 7
f f f ; 5).
Default is 0.666667 cubic
feet per bag, based on a
standard 80 pound bag.
Blocks/Bricks —
Calculates the number of
concrete blocks required