Table of Contents
Advertisement
PREPARATIONS FORE THE FIRST USE
Ensure if water inlet valve is OPEN.
Confirm that the battery has been correctly installed in the "remote controller".
Confirm that there is no obstacle in front of the product.
Wait for the host to finish the self-checking. During that time, it is normal to hear rotating sound of the motor and
bicker. Self-checking completed when the light light flashes.
When it is used for the first time, product will be in default state:
Front Wash:
Water Temperature: mid
Water flow intensity: mid
Position: mid
Rear Wash:
Water Temperature: mid
Water flow intensity: mid
Position: mid
Spiral Wash:
Water Temperature: mid
Water flow intensity: mid
Position: mid
1422537-TW01-A
Fig.#21
Seat Temperature: mid
Wind Temperature: mid
Night Light: On
Energy Saving Mode: 6H
Auto Lid Turning Function: On; distance, mid
Auto Flush Function: On
Auto UV Function: On
Electrolyzed water Function: On
Deodorizer: On
Water Pump: On (Press and hold flush and
front wash button on toilet side panel, short
"beep" indicates water pump is on, long
"beep" indicates water pump is off. )
12
Kohler Co.
Advertisement
Table of Contents
