Advertisement
Install and remove a filler panel in the power module slot 电源模块假面板的安装与拆卸
Install a filler panel 安装假面板
Install and remove a power module 电源模块的安装与拆卸
LSVM1AC650/LSVM1DC650 (LSVM1AC650 as an example) （以LSVM1AC650为例）
Install a power module 安装电源模块
Connecting the power cord 电源线的连接
Connect the DC power cord 连接直流电源线
Use a cable tie to secure the power Cord. The securing method is the same AC and DC
power cords. The following figure uses the AC power cord as an example.
使用可拆卸式扎带固定电源线，以防止电源线脱落；直流电源线和交流电源线的固定方式相
同，此处以交流电源线为例介绍电源线的固定过程。
Remove a filler panel 拆卸假面板
2
1
Remove a power module 拆卸电源模块
Connect the AC power cord 连接交流电源线
Copyright © 2018, New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
Copyright © 2018 新华三技术有限公司 版权所有，保留一切权利
本文档中的信息如有更改，恕不另行通知
如需了解产品及安装方面的更多信息，请登录H3C网站 www.h3c.com
Advertisement
