Assembly - HAMPTON BAY BENNINGTON 52389 Use And Care Manual

Assembly - Hanging the Fan (continued)
7
Installing the receiver
WARNING: To reduce the risk of fire or electric shock,
remember to disconnect power. The electrical wiring must
meet all local and national electrical code requirements. The
electrical source and fan must be 115/120 volt, 60Hz.
CAUTION: If other fan wires are a different color, have this unit
installed by a licensed electrician.
□
Position the supply wires to the left side of the mounting
bracket (A); position the fan wires to the right side. Partially
insert the remote control receiver (J) (flat side up) until one
end rests on the ball/downrod assembly (B).
□
Install a 9-V battery (included) into the remote control.
B
J
A
8
Making the electrical connection
IMPORTANT: Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
□
Connect the ground conductor of the 120-Volt supply (this
may be a bare wire or a wire with green colored insulation)
to the green ground lead(s) (II) of the fan using a plastic wire
connector (BB).
□
Connect the fan motor white wire (LL) to the receiver (PP)
white wire (LL) using a wire connecting nut (BB).
□
Connect the fan motor black wire (KK) to the receiver (PP)
black wire (KK) using a wire connecting nut (BB).
□
Connect the fan motor blue wire (JJ) to the receiver (PP) blue
wire (JJ) using a wire connecting nut (BB).
□
Connect the receiver (PP) black wire (OO) to the supply black
(hot) wire (KK) using a wire connecting nut (BB).
□
Connect the receiver (PP) white wire (LL) to the supply white
wire (neutral) (LL) wire using a wire connecting nut (BB).
□
Spread the wires apart so that the green (II) and white (LL)
wires are on the side of the outlet box (MM) and the black
wire (KK) is on the other side.
□
Turn the wire connecting nuts upward, and push the wiring
into the outlet box (MM).
JJ
KK
9
Please contact 1-855-HD-HAMPTON for further assistance.
MM
PP
LL
LL
HAMPTONBAY.COM