Sony D8 Digital Handycam DCR-TRV720E Operating Instructions Manual page 93

Digital video camera recorder
Hide thumbs Also See for D8 Digital Handycam DCR-TRV720E:
Table of Contents

Advertisement

Changing the menu settings
Icon/item
Mode
HiFi SOUND
z STEREO
TBC*
z ON
TBC stands for "Time Base Corrector".
DNR*
z ON
DNR stands for "Digital Noise Reduction".
AUDIO MIX
NTSC PB
z ON PAL TV
PB MODE
z AUTO
A/V t DV OUT
z OFF
When you play back tapes recorded in the Hi8/standard 8 system only.
*
Notes on AUDIO MIX
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
•You can adjust the balance only for tapes recorded in the Digital8
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Note on PB MODE
The mode will return to the default setting when:
– you remove the battery pack or power source.
– you turn the POWER switch.
Meaning
To play back a stereo tape or dual sound track tape
with main and sub sound (p. 163)
1
To play back a stereo tape with the left sound or a
dual sound track tape with main sound
2
To play back a stereo tape with the right sound or a
dual sound track tape with sub sound
To correct jitter
OFF
To not correct jitter. Set TBC to OFF when playing
back a tape on which you have dubbed over and
recorded the signal of a TV game or similar machine.
To reduce picture noise
OFF
To reduce a conspicuous afterimage when the picture
has a lot of movement
To adjust the balance between the stereo 1 and stereo
———
2
To playback a tape recorded on your camcorder on a
PAL system TV
To playback a tape recorded in the NTSC colour
NTSC 4.43
system on a TV with the NTSC 4.43 mode
To automatically select the system (Hi8/standard 8
or Digital8
and play back the tape
To play back a tape that was recorded in the Hi8/
/
standard 8 system when your camcorder does not
automatically distinguish the recording system
To convert digital video signals into analog video
signals via your camcorder
To convert analog video signals into digital video
ON
signals via your camcorder
"A/V t DV" appears on the LCD screen or in the
viewfinder. (p. 82)
ST1
ST2
) that was used to record on the tape,
system.
POWER
switch
VTR
VTR
VTR
VTR
VTR
VTR
VTR
93

Advertisement

Table of Contents
loading

This manual is also suitable for:

D8 digital handycam dcr-trv820e

Table of Contents