Sony DCR-TRV12E Operating Instructions Manual page 250

Changing the menu settings
Icon/item
OTHERS
DATA CODE
(On the Remote
Commander)
WORLD TIME
BEEP
COMMANDER
DISPLAY
1) DCR-TRV14E/TRV19E/TRV22E/TRV33E
2) DCR-TRV12E/TRV14E
3)
DCR-TRV19E/TRV22E/TRV33E
4)
DCR-TRV22E/TRV33E
Note
If you press DSPL/BATT INFO with DISPLAY
set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on
the LCD screen even when your camcorder is
connected to the output jacks on the TV or
VCR.
250
Mode
1)
z DATE/CAM
DATE
——
z MELODY
NORMAL
OFF
1)
z ON
OFF
z LCD
V-OUT/LCD
Meaning
To display date, time and various settings during
playback when you press DATA CODE on the
Remote Commander (p. 56)
To display date and time during playback when
you press DATA CODE on the Remote
Commander
To set the clock to the local time. Press r/R to set a
time difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the originally
set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
To output the beep instead of the melody
To cancel melody, the beep sound and shutter
sound
To activate the Remote Commander supplied
with your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR's remote control
To show the display on the LCD screen and
viewfinder
To show the display on the TV screen, LCD screen
and viewfinder
POWER
switch
2)
/
3)
4)
4)
2)
/
3)
4)
2)
/
3)
4)
2)
/
3)
4)