Sony Digital Handycam DCR-PC100E Operating Instructions Manual page 160

Troubleshooting
Symptom
The cassette cannot be removed from
the holder.
The % and Z indicators flash and no
functions except for cassette ejection
work.
indicator does not appear when
using a tape with cassette memory.
Remaining tape indicator is not
displayed.
When operating using the "Memory Stick"
Symptom
Recording does not function.
The image cannot be deleted.
You cannot format the "Memory
Stick."
Deleting all the images cannot be
carried out.
You cannot protect the image.
160
Cause and/or Corrective Actions
• The power source is disconnected.
c Connect it firmly. (p. 14, 18)
• The battery is dead.
c Use a charged battery pack. (p. 14, 15)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least one hour to acclimatize. (p. 176)
• The gold-plated connector of the tape is dirty or dusty.
c Clean the gold-plated connector. (p. 156)
• The q REMAIN is set to AUTO in the menu settings.
c Set it to ON to always display the remaining tape
indicator. (p. 98)
Cause and/or Corrective Actions
• The "Memory Stick" has already been recorded to its full
capacity.
c Erase unnecessary images and record again. (p. 124, 148)
• The "Memory Stick" formatted incorrectly is inserted.
c Format the "Memory Stick" or use another "Memory
Stick." (p. 102)
• The write-protect tab on the "Memory Stick" is set to
LOCK.
c Set the tab to write. (p. 115)
• The "Memory Stick" is not inserted.
c Insert a "Memory Stick." (p. 118)
• The image is protected.
c Cancel image protection. (p. 146)
• The write-protect tab on the "Memory Stick" is set to
LOCK.
c Set the tab to write. (p. 115)
• The write-protect tab on the "Memory Stick" is set to
LOCK.
c Set the tab to write. (p. 115)
• The write-protect tab on the "Memory Stick" is set to
LOCK.
c Set the tab to write. (p. 115)
• The image to be protected is not being played back.
c Press MEMORY PLAY to play back the image. (p. 138)