Sony Digital Handycam DCR-PC100E Operating Instructions Manual page 104

Changing the menu settings
Icon/item
CLOCK SET
LTR SIZE
DEMO MODE
WORLD TIME
BEEP
COMMANDER
DISPLAY
Notes on DEMO MODE
•You cannot select DEMO MODE when a cassette is inserted in your camcorder.
•DEMO MODE is set to STBY (Standby) at factory and the demonstration starts about 10 minutes
after you have set the POWER switch to CAMERA without a cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to other than CAMERA, or
set DEMO MODE to OFF.
•When NIGHTSHOT is set to ON, the NIGHTSHOT indicator appears on the LCD screen or in
the viewfinder and you cannot select DEMO MODE in the menu settings.
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a
TV or VCR will not appear on the LCD screen even when your camcorder is connected to outputs
on the TV or VCR.
104
Mode Meaning
To reset the date or time (p. 113).
z NORMAL To display selected menu items in normal size.
2 To display selected menu items at twice the
normal size.
z ON To make the demonstration appear.
OFF To cancel the demonstration mode.
To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The
clock changes by the time difference you set
here. If you set the time difference to 0, the
clock returns to the originally set time.
z MELODY To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
NORMAL To output the beep instead of the melody.
OFF To cancel the melody and beep sound.
z ON To activate the Remote Commander supplied
with your camcorder.
OFF To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR's remote control.
z LCD To show the display on the LCD screen and
viewfinder screen.
V-OUT/LCD To show the display on the TV screen, LCD
screen and viewfinder screen.
POWER
switch
CAMERA
MEMORY
VTR
CAMERA
MEMORY
CAMERA
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY