Graco C Series Instructions - Parts Manual page 21

Technical Specifications
Heavy-Duty Stainless Steel Drum Agitators
Maximum working pressure
Motor power rating at 1200 rpm (shaft at 50
rpm), using 12 cfm (0.34 m3/min)
Maximum recommended shaft rpm
Gear reducer ratio
Ambient operating temperature range
Air inlet
Siphon tube I.D.
Maximum flow at 100 cps
Maximum flow at 1000 cps
Air consumption
Measurements
Height
From top of air motor to end of agitator
shaft (no nut)
From top of air motor to end of siphon tube
(no fittings)
Span of agitator blades
Width of agitator blades
Noise (dBa)
† Typical operating conditions
Sound power
Sound pressure
‡ Maximum noise conditions
Sound power
Sound pressure
Sound power measured per ISO-3744-1981.
† 50 rpm (shaft) agitating 300 cps water-base material.
‡ 100 rpm (shaft) agitating an empty container.
Materials of Construction
Wetted materials
Weight
All models
Reference Information
Maximum storage time (varies with conditions) 10 years
Maximum lifetime (varies with operating condi-
tions and maintenance)
Power Efficiency Factor (varies based on con-
figuration, operating parameters, and material)
Notes
®
Gast is a registered trademark of Gast Manufacturing.
®
Inhibisol is a registered trademark of Penetone Corp.
308609V
US
100 psi
0.25 hp
100
24:1
+33.8°F < Ta < +104°F
Mates with 1/4-in. npt(f) quick-disconnect,
part number 208536
3/4 in.
12 gpm
1.2 gpm
3 to 30 scfm
38 in.
43 in.
20 in.
3 in.
77.3 dBa
63.8 dBa
86.4 dBa
72.9 dBa
304 SST, 304/304L SST, acetal, A/F, nylon, PTFE
25.8 lb
10 years
0.1 HP/SCFM air consumed
with motor at 500 rpm
Technical Specifications
Metric
0.7 MPa, 7 bar
186 W
+1°C < Ta < +40°C
19 mm
45.5 lpm
4.5 lpm
0.08 to 0.85 m3/min
965 mm
1092 mm
508 mm
76 mm
11.7 kg
2.7 W/Liter air consumed with
motor at 500 rpm
21