TRAINING MANUAL
ADDING RINSE AID
The factory setting for rinse aid dispensing is 3. Too little rinse aid contributes to
spotting, streaking, and poor drying performance. Too much rinse aid causes foaming,
which leads to poor washing performance.
How often you refill the dispenser depends upon your washing habits, including the rinse
aid setting, the number of loads per month you wash, and other factors. The indicator
light will illuminate at the start of a load when the level is low.
LDF9932XX
Turn the round cap counterclockwise and
remove it.
Fill the reservoir. It holds 4.8 oz. (145 ml)
Replace the cap and lock it.
Adjust the rinse-aid setting
as necessary.
Page 26
LDF9932XX
DISHWASHER