TRAINING MANUAL
SUMP ASSEMBLY, continued
LDF9932XX
Remove two screws to remove the vario
motor. It can be removed and replaced
without further disassembly of the sump,
even with the sump in place.
The turbidity sensor is mounted in the side
of the sump. It is held in place with two
clips which must be pried loose. It can be
removed and replaced without further
disassembly of the sump, even with the
sump in place.
The turbidity sensor is installed with an
O-ring that prevents leakage. It is a tight
fit, and must be correctly in place to avoid
a leak.
Page 21
LDF9932XX
DISHWASHER