Salt Filling; Adding Rinse Aid - LG D1452WLF Owner's Manual

BEFORE USING FOR THE FIRST TIME
Step 3. Salt Filling
In order to provide satisfactory rinsing results, the dishwasher requires soft water, i.e., containing
little or no lime, otherwise water stains will be left behind on the dishes and interior containers.
If the tap water exceeds a certain level of hardness, it must be softened, I.e.,decalcified.
This is achieved by adding a special salt to the water softener inside the dishwasher.
The required amount of salt is set up according to how hard your tap water is.
Filling with Salt
Fill the regenerating salt container
water around the tub in order to prevent corrosion.
to Pour 1.5kg of salt and 1 litre of water in to the container.
Otherwise salt refill lamp always turn on during operation.
Use a funnel for ease and clean filling, ensuring that coarse salt
or regenerating salt intended for dishwashers is used.
the container.
Step 4. Adding Rinse Aid
For filling
To fill the Rinse Aid chamber, push the rinse aid button. Fill the container to the maximum level
with a good quality Rinse Aid, then close the cap.
The Rinse Aid is automatically dispensed during the final rinse cycle.
The dosage is factory set to suit most installations. If, after washing, you notice cloudy spots,
streaks or water marks on your glassware, it may be necessary to increase the setting. To do this,
remove the cap and rotate the indicator arrow to a higher setting then replace the cap . If the glass
is smeared or foam is present on the bottom of the glass or the bottom of the machine, select a
lower setting.
course immediately to remove salt and salt
16
.