Install Anti-Tip Brackets; Install Warming Drawer - Monogram ZKW700S Installation Instructions Manual

INSTALL ANTI-TIP BRACKETS

WARNING
ANTI-TIP PRECAUTIONS
from tipping forward when opened and loaded. Failure to
do so could result in personal injury.

INSTALL WARMING DRAWER

location. Thread the cord through as the drawer is
being pushed back into the opening. Check to be
sure the power cord does not get trapped under the
drawer.
– If the outlet is installed inside the opening, plug
the cord into the outlet. In this location, the excess
power cord length should be coiled and taped to the
right side of the unit.
8
Installation Preparation
2x4 or 2x2
Runners or
Solid Bottom
the front flange is flush to the
cabinet front.
holes in the overlapping frame,
one on each corner.
Install 2x4 or 2x2
Against Rear
From Floor to
Bottom of Block
31-2000654 Rev. 3