Advertisement
P Tv Av M
You can freely select camera settings such as the shutter speed and
aperture value to suit your shooting purposes. After settings are
made, shooting procedures
are the same as for _
Auto Mode
(Basic Guide p. 6).
e
or information
on the relation between the aperture value
and shutter speed see p. 58.
• Please note that camera shake becomes a factor at low
shutter speeds and with larger aperture values. If _, (camera
shake warning) appears in the LCD monitor (or viewfinder),
try the following steps to resolve the problem.
- Use the _) (image stabilizer) function.
- Raise the ISO speed.
- Raise the flash to enable firing.
- Use a tripod.
P Program
AE
Use the program AE mode to have the camera automatically
set the
shutter speed
and aperture
value to match the brightness
of the
scene.
• When a correct exposure cannot be obtained, the shutter speed
and aperture values are shown in red on the LCD monitor when the
button is pressed
halfway. Use the following shooting
methods
obtain the correct exposure and make them show in white.
- Use the flash (raise the flash).
- Adjust the ISO Speed.
- Change
the metering
mode.
You can change the combinations
of shutter speeds and
aperture values without altering the exposure (p. 70).
o
E
57
Advertisement
