Advertisement
L Aim the camera
so that the color
you wish
to change
appears
at the center
of the LCD monitor
(or
viewfinder)
and press the •
button.
• Only one color can be specified.
• You can use the • or • button to specify the range of the colors
that are retained.
-5: Only takes the color that you want to change.
+5: Also takes colors close to the one that you want to change.
3 Aim the camera so that the desired color appears at
the center of the LCD monitor (or viewfinder) and
press the 1_ button.
• Only onecolorcan be specified.
4 Complete the setting with the SET button, and shoot.
• This completes the setting.
• When you press the Movie button, you can shoot movies in
Color Swap mode.
• The default setting for Color Swap changes green into white.
• You may not obtain the expected results after color input
mode if you use the flash.
• The colors specified in the Color Swap mode are retained
even if the camera's power is turned off.
(D
o
r.,
(D
55
Advertisement
