Advertisement
The s ymbol
will display
when
using
amemory
card that had
print settings
or transfer
settings
set by other DPOF-
compliant
cameras.
The camera
automatically
brightened
he image
displayed
on the L CD monitor
(or
viewfinder)
to make iteasier
to
see w hen
shooting
in adark
area (p. 19).
• Be careful when making changes to the print or
_'ansfer settings wi_ other DPOF cameras,
because all such settings will he overwritten by
your camera (pp. 105,111,114).
• There is no effect on the recorded image.
Camera is in Playback or
computer/printer connection
mode.
• Turn the mode lover to the left or press the shutter
button halfway to switch to Shooting mode.
• During a computer or printer connection,
disconnect lhe interface cable before switching
lhe camera to Shooting mode.
Flash is charging. (Blinking
• Wait until _, stops blinking and lights steadily,
white _ on LCD monitor/in
signaling that the flash is charged, then press the
vlawfinder),
shutter button.
Memory card full.
• Insert a new memory card (Basic Guide p. 1).
• If required, download the images to a computer
and erase them from the memory card to make
space.
Memory card is not formatted
• Format _
memorycard (p. 35).
correclty.
• If refermet_ngdoes not work, _
memory card logic
circuitsmay be damaged. Consult _henearest
Canon Customer Support Help Desk.
SD memory card is write
• Slide the write protect tab of the SD memory card
protected,
upward (p. 133).
Advertisement
