Advertisement
l Shooting/Viewing
Images on a TV set
You can use a video-compatible
television as a monitor to shoot or
play back images when it is connected to the camera with the
supplied Stereo/Video Cable STV-250N.
1
Turn
off the camera
and the TV.
N
u Connect
the StereoNideo
Cable
to the camera's
AN OUT terminal.
eWith your fingernail on the left edge of
the camera's DIGITAL terminal cover,
pull it forward to open it, and plug the
Stereo/Video
Cable in all the way.
3 Plug the other ends of the StereoNideo
Cable into the
VIDEO IN and AUDIO IN jacks on the TV.
To the Video IN Jack
Plug (Yellow)
;__
_
To the Audio IN Jack
Plug (Left) (White)
.
To the Audio IN Jack
Plug (Right) (Red)
4
Turn on the TV and switch
it to Video
mode.
5 Power on the camera.
o he video output signal can be switched (NTSC or PAL) to
accommodate
different regional standards (p. 32). The
default setting varies between regions.
-NTSC:
Japan, U.S.A., Canada, Taiwan and others
-PAL: Europe, Asia (excluding Taiwan), Oceania and others
• If the video system is set incorrectly, the camera output may
not display properly.
Advertisement
