Advertisement
Youattempted to eraseor edit a protected image,movie or sound.
Toomanyimageshavebeenmarkedwithprintsettings,_'ansfer s ettings, o rslide
shows.Cannot p rocess any more.
Couldnotcompletely savethe print,transferor slideshowsettings.
Youattempted to settheprintsettingsfora non-JPEG image.
Thefile sbecifled forslideshowplayback is damaged.
Thecomputer w asunableto download the imageduetothe largeamount o f images
(approx.1000) s toredon thememorycard.
Camera detected an error while moving the lens and cut the power automatically. This
error message may appear if you press on the lens while it is moving or power up the
camera in a dustyor sandy environment. Power up the camera again and shoot or
playback images. Take the camera to a service canter if this message appears
r-
frequently because there may be a problem with the lens.
(xx: number) Camera detected an error. Turn the power off and then back on, then
(D
shoot or play back. A problem exists if the error code reappears. Note the number and
contact your Canon Customer Support Help Desk. If an error code displays directly
I_
after taking a picture, the shot may not have been recorded. Check image in playback
mode.
(_
Advertisement
