Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bante Instruments PHscan30
Summary of Contents for Bante Instruments PHscan30
- Page 1 PHscan30 Pocket pH Tester USER MANUAL Bante Instruments Inc.
-
Page 2: Prior To Use
PHscan30 MEAS Indicates that the tester is in the measurement mode Overview Indicates that the tester is in the calibration mode SETUP Indicates that the tester is in the setup mode Thank you for selecting the PHscan series pocket pH tester. This user... -
Page 3: Setup Menu
In the measurement mode, press and hold the Cal key to enter Setup Menu the setup menu. The PHscan30 tester contains 7 menu items in the setup menu, the following table describes the functions of each option. Option Menu item... -
Page 4: Single Point Calibration
PHscan30 For better accuracy, we recommend calibrating the tester regularly. DO NOT reuse the buffer solutions after calibration, contaminants solution will affect the calibration and eventually the accuracy of the. measurement. Single Point Calibration Ensure that you have selected 1 point calibration in the setup menu. -
Page 5: Temperature Calibration
Press the Enter key to save and press the Meas key to return to the measurement mode. Temperature Calibration The PHscan30 tester is installed with a built-in temperature sensor for automatic temperature compensation. During the measurement, if the measured temperature reading differs from that of an accurate thermometer, the tester needs to be calibrated. -
Page 6: Cleaning The Electrode
PHscan30 Electrode Appendix Maintenance and Replacement Preparation of pH Buffer Solutions The PHscan30 tester is packaged with the pH 4.01/7.00/10.01 buffer Cleaning the Electrode sachets required for calibration. • Since the pH-sensitive membrane is susceptible to contamination, Half fill a 250 ml volumetric flask with distilled water and add the make sure that rinse the electrode thoroughly with distilled water pH 7.00 buffer reagent. - Page 7 PHscan30 pH Electrodes Other Specifications Order Code and Description Operating Temperature 0 to 50° C (32 to 122° F) E-PHscan-ST-10K Storage Temperature 0 to 60° C (32 to 140° F) • Circular pH-sensitive membrane Relative Humidity < 80% (non-condensing) • For measuring the general water samples...
-
Page 8: Warranty
Tel: (+1) 346-762-7358 E-mail: banteinstruments@yahoo.com Factory: A10, No.2066, Laifang Rd., Shanghai 201615, China Tel: (+86) 21-6404-1598 E-mail: banteinstrument@hotmail.com The information in this document is subject to change without notice. www.bante-china.com Copyright © Bante Instruments Inc, 2022. All rights reserved.
Need help?
Do you have a question about the PHscan30 and is the answer not in the manual?
Questions and answers