Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Bante Instruments TDSscan Series
Summary of Contents for Bante Instruments TDSscan Series
- Page 1 TDSscan10 Pocket TDS Tester Instruction Manual Bante Instruments Inc.
-
Page 2: Prior To Use
TDSscan10 Overview Thank you for selecting the TDSscan series pocket total dissolved solids tester. This manual provides a step-by-step guide to help you operate the instrument, please carefully read the following instructions before use. Installing the Batteries Remove the battery compartment lid. -
Page 3: Tds Calibration
TDSscan10 TDS Calibration The TDSscan10 tester allows 1 point calibration. For better accuracy, we recommend to calibrate the tester regularly. The following table shows acceptable standard solutions for each tester. Model Standard Solution Range Default TDSscan10 L 50 to 99.9 ppm 71.8 ppm TDSscan10 M 500 to 999 ppm... - Page 4 TDSscan10 Measurement TDS Measurement Rinse the electrode with deionized water. Place the electrode into the sample solution and stir gently. Make sure that no air bubbles on the sensor surface. Wait for the measurement to stabilize and record the reading. If the display shows indicating the measurement exceeds the range, remove the tester from the sample immediately.
-
Page 5: Specifications
TDSscan10 Appendix Calculating the TDS Conversion Factor The TDSscan10 tester allows setting the conversion factor according to the type of sample. The factory default is 0.50. The following formula describes the calculation method. Factor = Actual TDS / Actual Conductivity @ 25° C Where: Actual TDS = Value from the high purity water and precisely weighed NaCl or KCL reagent. -
Page 6: Warranty
TDSscan10 Disposal This tester is required to comply with the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC and may not be disposed of in domestic waste. Please dispose of this product in accordance with local regulations at the collecting point specified for electrical and electronic equipment.
Need help?
Do you have a question about the TDSscan Series and is the answer not in the manual?
Questions and answers