Bante Instruments ORPscan10 Instruction Manual

Bante Instruments ORPscan10 Instruction Manual

Pocket orp tester

Advertisement

Quick Links

ORPscan10/20 Pocket ORP Tester
Instruction Manual
Bante Instruments Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ORPscan10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bante Instruments ORPscan10

  • Page 1 ORPscan10/20 Pocket ORP Tester Instruction Manual Bante Instruments Inc.
  • Page 2 ORPscan10/20 Overview Thank you for selecting the ORPscan10/20 pocket ORP tester. This manual provides a step-by-step guide to help you operate the tester, please carefully read the following instructions before use. Installing the Batteries Twist the electrode collar counter clockwise, pull the electrode (or BNC connector) away from the tester.
  • Page 3 ORPscan10/20 • ORPscan20: Take out the ORP electrode from carrying case. Insert the BNC connector into the connector socket on tester, rotate and push the connector clockwise until it locks. Remove the protective cap from the bottom of the electrode.
  • Page 4 ORPscan10/20 Calibration The ORPscan series tester allows 1 point calibration, but calibration is not necessary unless exact readout agreement with a work standard and at a specific ORP value is needed. Rinse the electrode with deionized water and place into the standard solution. Stir the electrode gently and wait until the measurement is stable.
  • Page 5 ORPscan10/20 Appendix Preparation of ORP Standard Solutions Quinhydrone solution A: Dissolve 3 grams of quinhydrone reagent in 500 ml of the pH 4.01 buffer solution, stir the solution for about 10 minutes. Undissolved quinhydrone reagent must be present. If necessary, add the reagent.
  • Page 6 • Improper or inadequate maintenance by customer. • Unauthorized modification or misuse. • Operation outside of the environment specifications of the products. For more information, please contact the supplier. Bante Instruments Inc. Office: 4715 Castlewood St., Sugar land, TX 77479, USA Tel: (+1) 346-762-7358 E-mail: banteinstruments@yahoo.com Factory: A10, No.2066, Laifang Rd., Shanghai 201615, China...

This manual is also suitable for:

Orpscan20

Table of Contents