Emergency Buttons - GE PathSpeed CR SP1001 User Manual

Constant/
Color
Flashing
Constant
Green
Flashing
Constant
Red
Flashing
For digitizing unidentified emergency images of the trunk.
For digitizing unidentified emergency images of the limbs.
The status indicator
At the top of the PathSpeed CR SP100
indicates the status of the PathSpeed CR
Status
Ready
Busy (treating image
plate)
Error
• Locked or warning
• Power on/self-test in
progress
• Key-operator mode
• Service mode
• PathSpeed CR
SP1001 not
connected to image
processing device

Emergency buttons

Two emergency buttons are located at th
the PathSpeed CR SP1001. They permit
ing emergency image plates without ID d
upper button permits processing of em
images of the trunk; the lower button per
cessing of emergency images of the limbs
The emergency buttons have the followin
Action
Proceed
Wait
• Check display for mess
• Refer to 'Troubleshootin
checklist' on page 42.
• Check display for mess
• Refer to 'Troubleshootin
checklist' on page 42.