Advertisement
iC-7 TO OBD-II INSTALLATION
The iC-7 to OBD-II CAN Cable allows the
Haltech iC-7 Dash to display the data obtained
from the vehicle's OBD-II system in real-time.
This cable also provides a power source to the
dash.
The +12V Supply from the vehicle's OBD II
connector is constant and would cause the dash
to be powered even when the vehicle is off.
For this reason, the RED power wire must be
connected to a switched +12V "Key On" power
source in the vehicle as per the diagram (ie.
connection to switched +12V supply)
Please refer to your specific ECU wiring
diagram for more information.
Haltech iC-7 OBD-II Dash (HT-067012)
comes supplied with a 1400mm (55")
OBD-II CAN Cable (HT-135003).
This cable is used to connect the
Haltech iC-7 to your car's OBD-II port.
Connect to
the OBD-II port
on your vehicle
FUSE
IGNITION
SWITCH
3A
28mm
28mm
8mm
Through Hole
GROUND
Advertisement
