pagertec Smart Stack EVO User Manual page 3

I nstalling the Transmitter
​
​
T he first consideration in the placement of the transmitter is convenience. It should be
readily accessible in a central location within the paging area. Pay close attention to
nearby obstructions such as walls, pipes, ducts, mirrored glass, or other similar barriers
that may weaken or misdirect transmitted signals. Certain materials and construction,
especially metal, have the potential to partially or completely block the paging signal.
The next consideration involves safety. Ensure the unit is securely mounted and away
from liquids, extreme heat and possible physical damage. Also remember that the
transmitting unit requires a 110V AC power outlet. Be sure an antenna is attached prior
to applying power to avoid damage to the transmitter. An optional molded plastic cover is
available as an accessory purchase, to protect the transmitter, especially in areas where
spillage is possible.
For best results, the transmitter antenna must be vertical. Ideally the transmitter should
be centrally located within the area where paging is to occur. Since this is not always
possible, range testing at different locations may be required to obtain the desired
performance.
Once the Desktop Transmitter and antenna have been installed, plug in the power
adapter. Once powered the transmitter will display ​
to send a page. We recommend some type of surge suppressor on the power supply for
protection. Power surges are not covered under system warranty.
Smart Stack EVO
" Enter Number'' i ndicating it is ready ​