pagertec Smart Stack EVO User Manual page 9

OUT OF RANGE (FACTORY DEFAULT: OFF)
With this feature, the coasters will beep when taken out of range of the transmitter to
inform the guest that they are too far away and will miss their page. The beeping will
automatically stop when they step back within range.
Be sure you have all your pagers before performing this procedure.
TURNING THE OUT OF RANGE ON
• Remove all the pagers from the charging unit or unplug the power supply that is
connected to the first charging base.
• At the ​
" Set Out of Range"
​ o r ​
ON O FF.
• Press the ​
" ENTER"
you that they received the new code.
• Press ​
" CANCEL"
FIELD TEST (FACTORY DEFAULT: OFF)
With this feature you can determine what distance your transmitter will cover.
​
• R emove a couple of coasters from the charging stack.
A t the Field Test menu, press ​ ​
•
range test. As soon as the range test is activated you'll notice the coasters flash once
every 30 seconds. Walk around your property. When you reach the point where the
m enu, press the ​ ​
​
k ey. After sending the signal, all the coasters will light up once to tell
​
k ey to exit the system programming menu.
" ENTER"
​
" ENTER" k ey to select the out of range
k ey to turn Field Test ​ ​ ​
" ON" a nd to start the