pagertec Smart Stack EVO User Manual page 8

To change the Alert time mode of your pagers, follow these instructions:
1.​ ​ A t the "Set Alert Time" menu press ​
2.​ ​ U se the ​ " ▲""▼"
3.​ ​ S elect one of 9 Alert times as below then press ​
1.​ ​ 2 SEC
2.​ ​
5 SEC
3.​ ​
1 0 SEC
4.​ ​ 1 5 SEC
5.​ ​
3 0 SEC
6.​ ​ 6 0 SEC
7.​ ​ 9 0 SEC
8.​ ​
1 20 SEC
9.​ ​ C ontinuance
•​ The pagers will now respond with your new selected alert time mode. • Return all
the pagers to the charger base or plug the power supply. The pagers are ready to
receive the page with its new alert mode.
•​ At this point, all of the pagers in your system should alert for the amount of time that
you selected.
4.​ ​ P ress ​ ​
" C" k ey to exit, and return to the main menu.
SET PAGER OFF
With this feature you can have the option of turning off the pager to save battery.
1.​ ​ R emove all the pagers from the chargers
2.​ ​ A t the ​ " set pager off"
3.​ ​
P ager off ? will appear on display
4.​ ​ P ress Send, all pagers that have received the signal will blink for 2 seconds
" Enter"
k ey to scroll through the different times ​
p ress ​ ​ " ENTER"
" SEND"