Advertisement
Figure 1
Figure 2
1
2
1
LOWER Button
2
FWD/BWD CONTROL Wheel
3
HORN Button
4
EMERGENCY STOP Button
5
RAISE Button
Figure 3
A
PAGE 2 OF 7
OPERATING INSTRUCTIONS CONTINUED
On/Off switch
Battery capacity meter
Emergency
shut-off switch
3
4
2
SAFE-LOADING GUIDELINES
B
OPERATION OF THE TRUCK
EMERGENCY SHUT-OFF SWITCH
— All electric control functions are cut off when the
emergency shut-off switch is pressed. (See Figure 1)
EMERGENCY STOP BUTTON
— Truck will automatically brake when button is
pressed. (See Figure 2)
BRAKING
— Release the control handle and the truck
automatically brakes.
— The control handle will return to upright position.
DRIVING
— Drive speed is controlled by the FWD/BWD control
wheel. (See Figure 2)
LIFTING OF FORKS
— Press the "RAISE" button to raise the forks to
required height. (See Figure 2)
LOWERING OF FORKS
— Press the "LOWER" button to lower the forks to
5
required height. (See Figure 2)
CAUTION! Before loading cargo, the operator
must check to confirm the cargo is properly
placed on the pallet and the weight of cargo
is within the load capacity of the truck. Load
weight should be evenly distributed between
the two forks.
1.
Do not handle unstable or loosely stacked loads.
2. Do not overload the truck.
3. Always center loads on the forks, not at the end of
the forks. (See Figure 3)
4. The capacity of the truck assumes an evenly
distributed load with the center of the load being
at the halfway point of the length of the forks.
5. Make sure that length of the forks matches the
length of the pallet load.
0312 IH-3405
Advertisement
