Advertisement
SAFETY INFORMATION
To order parts and supplies: 800.343.9353 >> eastwood.com
READ INSTRUCTIONS
• Thoroughly read and understand this manual before using.
• Save for future reference.
• Bead Rollers consist of heavy metal components which can present a hand/
finger pinch hazard and cause potentially serious injuries if dropped. Avoid
pinching hands while handling. The use of safety shoes is strongly recom-
mended. Keep fingers and hands away from moving parts when operating.
• Handling sharp metal can cause serious cuts. Wear thick, well-fitting
work gloves to prevent cuts from handling sharp metal.
• Metal particles can be ejected from the metal surface when bending.
Sheet metal edges and corners are sharp and can injure eyes.
Always wear ANSI approved eye protection when operating this tool.
• Before beginning ANY work with this tool, it is necessary that it be installed in
a vice properly secured to a sturdy, workbench anchored to the floor or wall.
• Strenuous physical force may need to be applied to the Bead Roller during
use. Failure to ensure proper footing can quickly result in a fall which could
inflict serious personal injury or property damage. Always work in a clean,
uncluttered environment.
• Be sure there is sufficient working room around the tool to allow for safe
handling of various sizes of metal.
• Excessive resistance while operating could indicate a defect with the work-
piece material or broken or damaged Bead Roller components. To avoid in-
jury, stop work immediately and inspect workpiece material for nicks, dents,
welds, excessive scale or remaining coatings. Clean or repair as necessary
or discard and begin with a new piece. Also inspect Bead Roller components
for looseness or damage.
PINCH AND CRUSH HAZARD!
CUT HAZARD!
EYE INJURY HAZARD!
3
Advertisement
