This symbol points to an important detail / tip in the operation of the
unit. Read carefully to avoid any problems.
NOTE
This manual describes the user interface of the control console
using images as displayed on the left. These images are
indicative only and the values displayed may differ from the
actual values unless specified otherwise.
1.4. Included System Components
The Wall Mounted Hatch X-Ray system is available in three model configurations
using different Extension arm assembly. Unpack each component and verify that
items listed below are received as appropriate. If any item is missing or damaged,
notify your authorized dealer.
Description
Hatch X-Ray X-RAY, FS04,Wall Mount, 15" Extension arm
Hatch X-Ray X-RAY, FS04,Wall Mount, 24" Extension arm
Hatch X-Ray X-RAY, FS04,Wall Mount, 33" Extension arm
Extension arm Assembly - one only
(Used with Wall Mount Units Only)
Note: The Tubehead is shipped attached to the Scissor Arm
Scissor Arm Assembly (includes cables)
70kVp 8mA Tubehead Assembly
Base Unit Assembly
Control Console with Cable
Template for Single and Two Stud Wall Plate Installations
Template for Remote Wall Plate Installations
Remote Keypad Console (Optional)
Remote Doorbell Switch
8
Table 1: Hatch X-Ray System Components
Wall Mounted
15 Inches Long (used on Model P/N-15)
24 Inches Long (used on Model P/N-24)
33 Inches Long (used on Model P/N-33)
HATCH X-RAY Operating Manual
Part No.
F303-002381-0
F303-002382-0
F303-002383-0