Setting The Default Start-Up Mode; Using Previously Used Exposure Parameters; Figure 19 : Setting A Start-Up Mode; Figure 20 : History Screen - hatch X-RAY Operating Manual

5.4. Setting the Default Start-up Mode

By default the console selects mode 2, adult, and maxillary incisor during start-up.
If you wish to select another combination as the default start-up mode, proceed
as follows.
Figure 19 : Setting a Start-up
Mode

5.5. Using Previously Used Exposure Parameters

The console stores the last 30 exposures in its internal memory and is not erased
by a power down. You may use one of these exposure details to deliver a new
exposure.

Figure 20 : History screen

40
Return to Home screen.
Change the preset mode and tooth anatomy as
preferred.
The icon appears at the right side of the display
to indicate that current combination is not the start-
up mode.
Press SET key to save current combination as the
default start-up mode.
At this point the
current combination is saved as the default start-up
mode.
Return to Home Screen.
Press MODE key to enter Mode Selection Screen.
Scroll using the UP / DOWN keys to highlight
History from the list and press SET key.
Scroll through the History Screen list using UP /
DOWN keys to highlight the preferred exposure
and press SET key to use the exposure parameters
for the next exposure.
Console returns to the Home Screen after pressing
SET key.
HATCH X-RAY Operating Manual
icon disappears to indicate that